True or False: Each type of cable has a prescribed bend radius , which is the radius of the maximum arc into which you can loop a cable without impairing data transmission. Show
True or False: The TIA/EIA standard for wall jacks in a work area require that at least one
outlet be provided for data and one for voice. True or False: Cable that is coated with flame-resistant polyvinyl chloride (PVC) is acceptable for use in plenum areas. True or False: The industry standard height for a rack in rack units is 42U. True or False: A 66 block is more suitable
for data connections than the older 110 block. True or False: Fiber-optic cable comes in two types: single-mode fiber (SMF) or multimode fiber (MMF). True or False: In a rack setup, a device called a KVM allows multiple consoles to connect to a single device on the rack. True or False: F5 Networks set the standard for the diagram symbols used to represent routers, switches, firewalls, and other devices. True or False: A master service agreement (MSA) is a contract that defines the terms of future contracts between parties, such as payment terms or arbitration arrangements. True or False: The process of designing, implementing, and maintaining an entire network is called the system life cycle. When planning horizontal cabling, what is the maximum allowable distance that can be used? In general, how much can a twisted-pair's cable be bent before data transmission may be impeded? No more than four times the diameter of the cable. What statement accurately describes what a cable bend radius
determines? A cable bend radius is the radius of the MAXIMUM arc into which you can loop the cable without impairing data. In order to ensure that a cable is not affected by electromagnetic interference, how far away should the cable be from fluorescent lighting? What is NOT a TIA/EIA recognized cabling type that can be used for horizontal cabling? What component of the backbone runs between a building's floors and can be used to connect an MDF and IDF or multiple IDFs? Where is a demarc located in relation to the structured cabling of an enterprise environment? In
the Main Distribution Frame (MDF) What component of enterprise level structured cabling serves as the location where an incoming network interface enters a building and connects with the building's backbone cabling?
During termination of twisted pair cabling, what should be done to ensure minimal cross talk is introduced? No more than 1 inch of the cable should be exposed. What statement correctly identifies the purpose of a software patch? A software patch is a correction, improvement, or enhancement to software. What type of diagram is a graphical representation of a network's wired infrastructure? Which of the following is a document that is sent as a request to vendors to submit a proposal for a product or service that your company wants to purchase? What is the name of the GUI front end that is available for the Nmap utility? What kind of document serves as a legally binding contract or part of a contract that defines, in plain language and in measurable terms, the aspects of a service
provided to a customer? In a voice over IP setup (VoIP), what kind of device converts signals from a campus's analog phone equipment into IP data that can travel over a phone company's analog telephone lines? A change coordinator functions as what type of manager? What does a statement of work document do? It documents in detail the work that must be completed for a particular object, and includes specifics such as tasks, deliverables, standards, payment schedule, and work timeline. Your company is setting itself up to distribute software made by
another company. What type of document should your company procure from the developing company? When creating network diagrams, what icon description typically represents a network switch? An icon that is rectangular, which contains four arrows pointing in opposite directions. When creating network diagrams, what icon description typically represents a network firewall? An icon that resembles a brick wall. When creating network diagrams, what icon description typically represents a network router? An icon that has a hockey-puck shape with two arrows pointing inward and two arrows pointing outward. Why should you not leave more than 1 inch of
exposed cable before a twisted-pair termination? The exposure of the cable can cause transmission interference between wires. What does backbone cabling consist of? The cables or wireless links that provide interconnection between the entrance facility and MDF, and between the MDF and IDFs. Which of the following is NOT a best practice when performing cable management? Cable ties should be pulled tightly to keep cables from moving around in a bundle. What type of documentation tool is a website that can be edited by users, allowing them to add files and photos and links between pages? What statement regarding main distribution frame or main distribution facilities is accurate? The MDF is the centralized point of interconnection for an organization's LAN or WAN. Equipment data racks most commonly are a standard width of what measurement? What standard describes uniform, enterprise-wide cabling systems, regardless of who manufactures or sells the various parts used in the system? A dedicated telephone switch or virtual switching device that connects and manages calls within a private organization, and manages call connections that exit the network through a VoIP gateway, is known by what term? VoIP PBX (private branch exchange) What type of tool would you utilize to terminate twisted pair wire on a 66 or 110 block? What statement regarding main distribution frame MDF or main distribution facilities is accurate true )?What statement regarding main distribution frame or main distribution facilities is accurate? d. The MDF is the centralized point of interconnection for an organization's LAN or WAN.
What is the name of the GUI front end that is available for nmap utility?Zenmap is the official Nmap Security Scanner GUI.
Which of the following is a document that is sent as a request to vendors to submit a proposal for a product or service?An RFP, “Request for Proposal,” is a document that asks vendors to propose solutions to a customer's problems or business requirements.
Why should you not leave more than 1 inch of exposed cable before a twisted pair termination quizlet?Why should you not leave more than 1 inch of exposed cable before a twisted-pair termination? The exposure of the cable can cause transmission interference between wires.
|